Now here's where we get to play stump the 9er and pretty much everyone else on the planet, 'cept for yours truly, since these are all home-boy specials made in the deepest dark wee hours of the mornin when nothin else in my bag of tricks would enable me to "Get R Dun".

The 2 on the left have similar, yet opposite functions of one another, which problee won't help much, but I mean really, this is WTF are these, yakno

The one on the right I'll just straight up give away since there's no way anyone is liable to get WTF it is other than a custom made 1/4" drive tool I made for one lousy exhaust manifold nut on my old Talon with a 2.0 Mitsu engine. This nut was located in such a weird position that I couldn't get on it straight with even a 1/4" drive ratchet and socket, no matter how hard I tried so I came up with this very short drive tool that was really only long enough for the 12mm socket to fit on it.

In later adventures with this same fastener I had access to my wobble socket extensions that let me get on this nut with a short 3/8" 12mm socket, but that night I was in a shop away from my main set of tools and just had to make do with a cuppla pieces of 1/4" key stock, a saw and a welder, so ....